ๆจกๅ
VTUVIA SN100 ASSEMBLY VIDEO
VTUVIA SN100 Instrutions
First, put the KEY of the battery in the "ON" position. Find the "M" button on the moniter, long-press it for a few seconds, then you will see the display is on. Long-press the "M" to close it.
First, put the KEY of the battery in the "ON" position. Find the "M" button on the moniter, long-press it for a few seconds to open the display, and then find the "+" button long-press it you will see the front light is open. Long-press the "+" to close it.
First, put the KEY of the battery in the "ON" position. Open the display by "M" button, and choose PAS levels by shortly press "+", PAS grade +1, shortly press"-", PAS grade-1. You can choose 0-5 levels.
1. Check the battery level and keep the Key of the battery in the "ON" position.2. Open the DISPLAY by long-press the "M" button for a few seconds, then you will see the display is on/off.3. If you still found the display isn't working. Please follow these steps:--Make sure full chargered the battery. --Make battey assembled in the right position. --Check the scew holes on the track, See it there is room to make the track insert more deeply. --Plug and unplug the wire which connects with the display.
VTUVIA SN100 Maintenance
Follow these steps please:
1. Shut off the power. Close the display and put the key on the OFF position.2. Check the connector with the motor and controller.3. Plug and unplug the connectors to see the error code is disappear or not.4. Contact us if the error code still exist.
1. Make sure full charged the battery, press the button on the battery board to check the battery capacity.2. Take out the battery to check the battery track. If there is a gab so the battery can't installed deeply.3. keep the KEY of the battery in the "ON" position. Open the DISPLAY by long-press the "M" button for a few seconds to see the display is working or not.
Why Choose Us
Free Shipping
Ships in 3 working days
Money Back Guarantee
30-days Return Acceptable
Contact Us
Professional after-sales service